Label applicator - reliable labeling
LA7000 - Reliable application of pre-printed labels
The LA7000 is a label applicator that reliably applies pre-printed labels to your product. A wide range of different applicators makes it possible to apply labels to one side, to two sides or even corner-wrap of a product. The applicators are driven by servo motors for reliable and consistently accurate labeling, and all settings are made via the integrated touch panel.
The right applicator arm for any labeling task
Linear applicator stamp - TAMP
The TAMP is the standard applicator arm and is used very frequently. It can be used for product labeling. Labels can be applied either to the top, bottom or side of a product.
The label is applied by a linear movement. To suit your application, we offer the TAMP with varying maximum strokes between 125 mm and 750 mm.
Using integrated sensors, the TAMP can detect the product surface and automatically respond to products of different sizes. This increases flexibility and reliability and reduces the complexity of labeling.
The applicator arm is driven by a servo motor. This allows large application speeds, accurate and consistent positioning, as well as easy adjustment via the integrated touch control panel.
On two sides - FASA
This applicator arm, which applies labels with a pivoting motion, can label any side of a product.
In addition, it can apply two labels to two different sides of a product. For example, to the front and top; other combinations are also possible.
This module is also ideally suited for applying longer labels across corners.
The FASA applicator is available with different arm lengths, thus achieving different ranges and cycle rates. It is driven by servo motors and allows for high application speeds and accurate positioning.
On non-flat surfaces - HST
The movable HST pad enables applying labels to uneven surfaces. The labels are pressed onto the passing product with one side of the pad using a roller. During this process, only the roller is in contact with the product; the inclination of the pad allows to compensate for uneven surfaces.
The HST applicator is based on the TAMP applicator arm. It also applies labels with a linear movement.
Labeling with a brush - WIPE
With WIPE, labels are applied using a wipe-on process. They can be applied either to the top, bottom or side of a passing product. For this, the labels are positioned on the product with an applicator edge and pressed onto it with a brush.
WIPE is only available with the LA7000 label applicator system.
Contactless - BLOW
For particularly pressure-sensitive products, we recommend the BLOW applicator system. It uses the TAMP, but instead of pressing the labels onto the products, it blows them on with a blast of air as the products pass by the applicator.
Corner-wrap - WASA
If you need to apply labels on the corner of a product, then the WASA applicator is the right choice for you.
This is a fully mechanical applicator for corner-wrapping. The WASA arm is positioned on the conveyor so that passing products are pushed against it. The labels are then applied across the corner of the products with an adjustable pressure.
Product advantages
Label applicator - LA7000
LA7000 application examples
In industrial applications, label applicators are used for labeling product packaging, cardboard boxes, and even for applying labels to pallets.
Possible applications from practice
We take product labeling to the next level. Find yourself labeling with labelers
Printing and applying just-in-time labels
Print & apply labelers from Allen Coding make it possible to print and apply labels in one single step and in the right quantity.
Frequently asked questions regarding the LA7000 Label Applicator
Do you have further questions? Find more information here.
The LA7000 is a label applicator only that applies pre-printed labels to your products or packaging fully automatically. The labels can be printed on a label printer at your location or they can be ordered from a printing plant. This makes it possible to use multi-color labels or high-gloss labels to meet the highest aesthetic requirements.
The label applicator is commonly used to apply labels directly on product packaging, on secondary packaging such as shipping boxes, but also for labeling pallets, for example.
The main difference between the various LA7000 systems is the applicator used for applying labels. We offer a wide range of labeling options, from applying labels with an applicator edge directly onto the product to a pivoting arm driven by servo motors, to give just two examples.
The position of the label on different sides of the product is the main criterion for selecting the right applicator. For example, some systems allow labeling on one side, others on two sides of a product. Corner-wrap application is also possible with some systems.
We will be happy to advise you and check how your labeling requirements can be implemented.
The LA7000 print & apply labeler comes equipped with an integrated color touch panel. All settings can be made there. A diagnostic function for quick and easy troubleshooting is also provided.
Mechanical installation can be done either on a base with wheels for flexible use in multiple locations, on a fixed base, or even directly on your production line.
The signal for initiating the labeling process can be triggered by an integrated optical sensor, a sensor installed on the system, or even by a signal from your system.
All you need for operation are labels and a power connection.
Technical data
| Data | LA7000 |
|---|---|
| Max. application speed | 800PPM; 90 m/min |
| Min. label dimensions | 13 mm x 13 mm; width x length |
| Max. label dimensions | 228 mm x 355 mm; width x length |
| Label roll capacity | 355 mm (outer roll diameter), 76 mm (core diameter) |
| Mains connection | 100 -240 VAC; 47 – 63 Hz; 3 – 6A |
| Ambient conditions | 5 - 40°; 15 - 85% RH; non-condensing |
| Dimensions | 787 mm x 508 mm x 686 mm (W x D x H) |
| Weight | 39 kg (label applicator without base) |
| Applicators | WIPE; E-TAMP; E-FASA; WASA; BLOW; HST |
